Forest 4
Forest 4" x 5'11" Fence Boards Pack of 10 (102mm x 1800mm)
Out of Stock 15 Year Anti Rot Guarantee Pressure Treated Free Delivery for orders over 200
£29.99

Forest 4" x 5'11" Fence Boards Pack of 10 (102mm x 1800mm)

Product code:
BSD18187
£29.99

These 1.8m Pressure Treated Boards are perfect for building your own garden fences.

  • Perfect for building a continuous run of strong and sturdy fencing.
  • Each board can be positioned at a slightly different height making this type of fencing ideal for uneven ground.
  • Ideal for creating an end panel if you have a gap smaller than the standard 6ft fence panel width.
  • Manufactured from pressure treated timber with a 15 year guarantee.
  • This pack contains 10 pressure treated boards.
Size & Specification
  • 3. Optional Extras
  • Arris Rails & Brackets
  • Fence Posts
  • x

    8' x 4" x 4" Forest Green UC4 Incised Fence Post (2400mm x 100mm x 100mm) -

    £33.99

    Green heavy duty rough sawn timber fence posts available in a variety of sizes and lengths. Always allow an extra 600mm if sinking the post in the ground.

    The pressure treated post has been incised for deeper preservative penetration giving it a 15 year anti–rot guarantee for use in ground contact. The sawn finish provides a rustic appearance, then finish off with a post cap or decorative finial.

    Make the job simple with our easy to use easy–fit fixing accessories. Always allow an extra 600mm in length than your actual fence height if sinking into the ground or to save time why not use one of our ‘easy fit’ fence spikes or bases as featured in the accessories.

    Recommended depth for sinking: 600mm

    Sizes available:

    7.5 x 7.5 x 150cm (3” x 3” x 5ft)

    7.5 x 7.5 x 180cm (3” x 3” x 6ft)

    7.5 x 7.5 x 210cm (3” x 3” x 7ft)

    7.5 x 7.5 x 240cm (3” x 3” x 8ft)

    7.5 x 7.5 x 270cm (3” x 3” x 9ft)

    7.5 x 7.5 x 300cm (3” x 3” x 10ft)

    10 x 10 x 180cm (4” x 4” x 6ft)

    10 x 10 x 210cm (4” x 4” x 7ft)

    10 x 10 x 240cm (4” x 4” x 8ft)

    10 x 10 x 270cm (4” x 4” x 9ft)

    10 x 10 x 300cm (4” x 4” x 10ft)

    • Incised for deeper preservative penetration
    • Available in 11 different sizes
    • Ideally suited for fencing 6ft in height
    • Recommended sinking depth 60cm
    • Finish off with a post cap or decorative finial
    Add
  • x

    7' x 4" x 4" Forest Green UC4 Incised Fence Post (2100mm x 100mm x 100mm) -

    £29.99

    Green heavy duty rough sawn timber fence posts available in a variety of sizes and lengths. Always allow an extra 600mm if sinking the post in the ground.

    The pressure treated post has been incised for deeper preservative penetration giving it a 15 year anti–rot guarantee for use in ground contact. The sawn finish provides a rustic appearance, then finish off with a post cap or decorative finial.

    Make the job simple with our easy to use easy–fit fixing accessories. Always allow an extra 600mm in length than your actual fence height if sinking into the ground or to save time why not use one of our ‘easy fit’ fence spikes or bases as featured in the accessories.

    Recommended depth for sinking: 600mm

    Sizes available:

    7.5 x 7.5 x 150cm (3” x 3” x 5ft)

    7.5 x 7.5 x 180cm (3” x 3” x 6ft)

    7.5 x 7.5 x 210cm (3” x 3” x 7ft)

    7.5 x 7.5 x 240cm (3” x 3” x 8ft)

    7.5 x 7.5 x 270cm (3” x 3” x 9ft)

    7.5 x 7.5 x 300cm (3” x 3” x 10ft)

    10 x 10 x 180cm (4” x 4” x 6ft)

    10 x 10 x 210cm (4” x 4” x 7ft)

    10 x 10 x 240cm (4” x 4” x 8ft)

    10 x 10 x 270cm (4” x 4” x 9ft)

    10 x 10 x 300cm (4” x 4” x 10ft)

    • Incised for deeper preservative penetration
    • Available in 11 different sizes
    • Ideally suited for fencing 5ft in height
    • Recommended sinking depth 60cm
    • Finish off with a post cap or decorative finial
    Add
  • x

    6' x 4" x 4" Forest Green UC4 Incised Fence Post (1800mm x 100mm x 100mm) -

    £26.49

    Green heavy duty rough sawn timber fence posts available in a variety of sizes and lengths. Always allow an extra 600mm if sinking the post in the ground.

    The pressure treated post has been incised for deeper preservative penetration giving it a 15 year anti–rot guarantee for use in ground contact. The sawn finish provides a rustic appearance, then finish off with a post cap or decorative finial.

    Make the job simple with our easy to use easy–fit fixing accessories. Always allow an extra 600mm in length than your actual fence height if sinking into the ground or to save time why not use one of our ‘easy fit’ fence spikes or bases as featured in the accessories.

    Recommended depth for sinking: 600mm

    Sizes available:

    7.5 x 7.5 x 150cm (3” x 3” x 5ft)

    7.5 x 7.5 x 180cm (3” x 3” x 6ft)

    7.5 x 7.5 x 210cm (3” x 3” x 7ft)

    7.5 x 7.5 x 240cm (3” x 3” x 8ft)

    7.5 x 7.5 x 270cm (3” x 3” x 9ft)

    7.5 x 7.5 x 300cm (3” x 3” x 10ft)

    10 x 10 x 180cm (4” x 4” x 6ft)

    10 x 10 x 210cm (4” x 4” x 7ft)

    10 x 10 x 240cm (4” x 4” x 8ft)

    10 x 10 x 270cm (4” x 4” x 9ft)

    10 x 10 x 300cm (4” x 4” x 10ft)

    • Incised for deeper preservative penetration
    • Available in 11 different sizes
    • Ideally suited for fencing 4ft in height
    • Recommended sinking depth 60cm
    • Finish off with a post cap or decorative finial
    Add
  • x

    8' x 3" x 3"Forest Green UC4 Incised Fence Post (2400mm x 75mm x 75mm) -

    £19.99

    Green heavy duty rough sawn timber fence posts available in a variety of sizes and lengths. Always allow an extra 600mm if sinking the post in the ground.

    The pressure treated post has been incised for deeper preservative penetration giving it a 15 year anti–rot guarantee for use in ground contact. The sawn finish provides a rustic appearance, then finish off with a post cap or decorative finial.

    Make the job simple with our easy to use easy–fit fixing accessories. Always allow an extra 600mm in length than your actual fence height if sinking into the ground or to save time why not use one of our ‘easy fit’ fence spikes or bases as featured in the accessories.

    Recommended depth for sinking: 600mm

    Sizes available:

    7.5 x 7.5 x 150cm (3” x 3” x 5ft)

    7.5 x 7.5 x 180cm (3” x 3” x 6ft)

    7.5 x 7.5 x 210cm (3” x 3” x 7ft)

    7.5 x 7.5 x 240cm (3” x 3” x 8ft)

    7.5 x 7.5 x 270cm (3” x 3” x 9ft)

    7.5 x 7.5 x 300cm (3” x 3” x 10ft)

    10 x 10 x 180cm (4” x 4” x 6ft)

    10 x 10 x 210cm (4” x 4” x 7ft)

    10 x 10 x 240cm (4” x 4” x 8ft)

    10 x 10 x 270cm (4” x 4” x 9ft)

    10 x 10 x 300cm (4” x 4” x 10ft)

    • Incised for deeper preservative penetration
    • Available in 11 different sizes
    • Ideally suited for fencing 6ft in height
    • Recommended sinking depth 60cm
    • Finish off with a post cap or decorative finial
    Add
  • x

    7' x 3" x 3" Forest Green UC4 Incised Fence Post (2100mm x 75mm x 75mm) -

    £17.49

    Green heavy duty rough sawn timber fence posts available in a variety of sizes and lengths. Always allow an extra 600mm if sinking the post in the ground.

    The pressure treated post has been incised for deeper preservative penetration giving it a 15 year anti–rot guarantee for use in ground contact. The sawn finish provides a rustic appearance, then finish off with a post cap or decorative finial.

    Make the job simple with our easy to use easy–fit fixing accessories. Always allow an extra 600mm in length than your actual fence height if sinking into the ground or to save time why not use one of our ‘easy fit’ fence spikes or bases as featured in the accessories.

    Recommended depth for sinking: 600mm

    Sizes available:

    7.5 x 7.5 x 150cm (3” x 3” x 5ft)

    7.5 x 7.5 x 180cm (3” x 3” x 6ft)

    7.5 x 7.5 x 210cm (3” x 3” x 7ft)

    7.5 x 7.5 x 240cm (3” x 3” x 8ft)

    7.5 x 7.5 x 270cm (3” x 3” x 9ft)

    7.5 x 7.5 x 300cm (3” x 3” x 10ft)

    10 x 10 x 180cm (4” x 4” x 6ft)

    10 x 10 x 210cm (4” x 4” x 7ft)

    10 x 10 x 240cm (4” x 4” x 8ft)

    10 x 10 x 270cm (4” x 4” x 9ft)

    10 x 10 x 300cm (4” x 4” x 10ft)

    • Incised for deeper preservative penetration
    • Available in 11 different sizes
    • Ideally suited for fencing 5ft in height
    • Recommended sinking depth 60cm
    • Finish off with a post cap or decorative finial
    Add
  • x

    6' x 3" x 3" Forest Green UC4 Incised Fence Post (1800mm x 75mm x 75mm) -

    £16.49

    Green heavy duty rough sawn timber fence posts available in a variety of sizes and lengths. Always allow an extra 600mm if sinking the post in the ground.

    The pressure treated post has been incised for deeper preservative penetration giving it a 15 year anti–rot guarantee for use in ground contact. The sawn finish provides a rustic appearance, then finish off with a post cap or decorative finial.

    Make the job simple with our easy to use easy–fit fixing accessories. Always allow an extra 600mm in length than your actual fence height if sinking into the ground or to save time why not use one of our ‘easy fit’ fence spikes or bases as featured in the accessories.

    Recommended depth for sinking: 600mm

    Sizes available:

    7.5 x 7.5 x 150cm (3” x 3” x 5ft)

    7.5 x 7.5 x 180cm (3” x 3” x 6ft)

    7.5 x 7.5 x 210cm (3” x 3” x 7ft)

    7.5 x 7.5 x 240cm (3” x 3” x 8ft)

    7.5 x 7.5 x 270cm (3” x 3” x 9ft)

    7.5 x 7.5 x 300cm (3” x 3” x 10ft)

    10 x 10 x 180cm (4” x 4” x 6ft)

    10 x 10 x 210cm (4” x 4” x 7ft)

    10 x 10 x 240cm (4” x 4” x 8ft)

    10 x 10 x 270cm (4” x 4” x 9ft)

    10 x 10 x 300cm (4” x 4” x 10ft)

    • Incised for deeper preservative penetration
    • Available in 11 different sizes
    • Ideally suited for fencing 4ft in height
    • Recommended sinking depth 60cm
    • Finish off with a post cap or decorative finial
    Add
  • Gravel Boards
  • x

    Forest 6' x 6" Pressure Treated Wooden Gravel Board (1.83m x 0.15m) -

    £11.49

    Protect your fencing with this timber gravel board which will help prevent damp rising from the soil and into the panel and could increase the life span of your fence panels.

    A 150mm high timber gravel board should be placed beneath each fence panel at ground level, so to avoid the panel itself being in contact with soil or garden waste (leaves etc). By preventing direct ground contact your fence panels will last longer, as they will remain free of excess ground moisture which can accelerate rot.

    Manufactured from FSC–Certified timber sourced from managed resources, these gravel boards have the benefit of being vacuum pressure treated for a longer lifespan.

    Compatible with 1800mm and 1830mm width fence panels (however will need to be cut down slightly for 1800mm panels).

    NOTE: No fixings are supplied with this product.

    • Timber Gravel Boards provide your fence with additional height increasing your privacy.
    • Ideal if you wish to protect your panels from damp and garden pests.
    • Using Timber Gravel Boards means that you can save money by only having to replace the boards and not the panels
    • The timber has been Pressure Treated to provide protection against rot and fungal decay for up to 15 years.
    • Compatible with 1800mm and 1830mm width fence panels (however will need to be cut down slightly for 1800mm panels).
    Add
  • Fence Post Accessories
  • x

    Forest Pk of 4 L Brackets -

    £5.49

    These rustproof L shaped fence panel brackets come complete with screws for fixing panels and gravel boards.

    At least 4 fence panel brackets are required for each panel being installed.

    At least 2 brackets are required for each gravel board ordered.

    • The 'L' shaped fence panel bracket is rust resistant therefore providing longer life.
    • Pre-cut holes are provided for easy mounting/fixing to your panels and gravel boards.
    • With an integral screw, this fence panel bracket is easy to install.
    • The bracket comes in a neutral colour and so will not stand out against your panels.
    Add
  • x

    Forest Fencefast easy-fit concrete-in 65-80mm -

    £8.79

    A Fence Post Support for use where ground conditions require the use of concrete.

    Designed to enable quick and easy installation of timber fences, they are manufactured from 2.5mm thick welded mild steel, having been galvanised and powder coated for dual corrosion protection.

    The twin bolt mechanism on the Fence Post Support provides a secure fit around the wood and clamps in place which allows for easy removal of damaged posts.

    Suitable for posts that are 70x70mm to 80x80mm

    Also available in: 90x90mm to 110x110mm

    • Fix your fence posts securely into a concrete foundation with these 65 - 80mm (3" nominal) Fence Post Supports. Also available in: 90-105mm (4" nominal)
    • Steel thickness 1.5mm to 3.00 mm - so designed to last.
    • 65-80mm (3" nominal) for thick posts.
    • Order one Fence Post Support for each post ordered and you can't go wrong.
    Add
  • x

    Forest Fencefast easy-fit concrete-in 90-105mm -

    £11.49

    A Fence Post Support for use where ground conditions require the use of concrete.

    Designed to enable quick and easy installation of timber fences, they are manufactured from 2.5mm thick welded mild steel, having been galvanised and powder coated for dual corrosion protection.

    The twin bolt mechanism on the Fence Post Support provides a secure fit around the wood and clamps in place which allows for easy removal of damaged posts.

    Suitable for posts that are 90x90mm to 110x110mm

    Also available in: 70x70mm to 80x80mm

    • Fix fence posts securely into concrete
    • Easy to install
    • Thick welded mild steel
    • Galvanised and powder coated
    Add
  • x

    Forest 65-80mm Post Support with Spike 600mm -

    £9.99

    A Post Support Spike is designed to enable quick and easy installation of timber fence posts, and are used best in normal soil conditions. Ideal for use with 70 x 70mm, and up to 80 x 80mm posts.

    This 600mm spike is best used with 1.2m fence posts. We would recommend using a driving tool (sold seperately) and a sledge hammer to drive this spike into the ground.

    The twin bolt mechanism provides a secure fit around the wood and clamps in place which allows for easy removal of damaged posts.

    We recommend checking the ground on which you intend to place the spikes for underground services before use.

    This product is manufactured from mild steel and coated in hammerite to protect against surface rust.

    • Post supports enable you to secure fencing posts into the ground without having to dig or cement. Great to use in normal soil conditions.
    • An adjustable box secures posts ranging from 65 - 80mm (nominal 3').
    • Manufactured from mild steel coated in hammerite to protect against surface rust.
    Add
  • x

    Forest 85-105mm Post Support with Spike 750mm -

    £15.49

    A Fence Post Support Spike is designed to enable quick and easy installation of timber fence posts, and are used best in normal soil conditions. Ideal for use with 110x 110mm posts.

    This product can simply be driven into the ground using a driving tool (sold seperately) and a sledge hammer.

    The twin bolt mechanism provides a secure fit around the wood and clamps in place which also allows for easy removal of damaged posts.

    We recommend checking the ground on which you intend to place the Fence Post Support spike for underground services before use.

    This product is manufactured from mild steel and coated in hammerite to protect against surface rust.

    • Fixes fence posts securely
    • Adjustable size to fit posts from 85-105mm
    • Manufactured from hammerite coated steel
    Add
  • x

    Forest Fencebase easy-fit 65-80mm -

    £8.79

    This versatile Fence Post Base support is for use on surfaces which can be drilled to accept expansion bolts, such as decking, patios and concrete.

    Simply bolt or screw (with your own fixings, dependant upon surface) your Easy–fit Fence Post Base support to the hard standing, then secure your wooden post in place using the bolts provided; Its adjustable design makes it suitable 65mm – 80mm size posts.

    • The Easy Fit Fence Post Base is suitable for securing 65 - 80mm (2 - 3") posts. Also available in size: 45 - 60mm (1.7 - 2.4")
    • Suitable to use with fence posts, pergolas and arches.
    • Mild steel construction
    • Coated in hammerite to protect against surface rust
    Add
  • x

    Forest Fencebase easy-fit 90-105mm -

    £10.49

    This versatile support is for use on surfaces which can be drilled to accept expansion bolts, such as decking, patios and concrete.

    Simply bolt or screw (with your own fixings, dependant upon surface) your Easy–fit post support to the hard standing, then secure your wooden post in place using the bolts provided; Its adjustable design makes it suitable 90mm – 105mm size posts.

    • The Easy Fit Fencebase is an adjustable product that can secure 90-105mm posts.
    • An ideal product to use if fitting posts onto concrete or hard surface areas. It is suitable to use with fence posts, pergolas and arches.
    • It measures at 157.5mm high, with a steel thickness of 2.5mm.
    • Manufactured from mild steel coated in hammerite to protect against surface rust.
    Add
Out of stock
  • Accessories
  • Specification
  • Description
  • Trustpilot Reviews
  • From The Supplier: Forest Garden
  • Delivery

Specification

Brand Forest Garden
Guarantee 15 years
Length 1800
Thickness 15
Treatment Pressure treated
Width 102

Description

Our 1.8m Pressure Treated Boards are ideal if you are building your own garden fence. The boards can be positioned in various ways and will create a continuous run of strong and sturdy fencing.

These boards are manufactured from pressure treated timber giving a 15 year guarantee against rot and fungal decay.

Each pack contains 10 pressure treated boards.

  • Perfect for building a continuous run of strong and sturdy fencing.
  • Each board can be positioned at a slightly different height making this type of fencing ideal for uneven ground.
  • Ideal for creating an end panel if you have a gap smaller than the standard 6ft fence panel width.
  • Manufactured from pressure treated timber with a 15 year guarantee.
  • This pack contains 10 pressure treated boards.

Trustpilot Reviews

From the Supplier: Forest Garden

"We're proud to be the largest and most trusted manufacturer and distributor of garden timber products in the UK" - Forest Garden

Forest Logo

Making British Gardens Great

At Forest, we know a fair bit about fences. And sheds for that matter. In fact, we've been one of the UK's most trusted manufacturer and distributor of quality wooden garden products for over 50 years.

With two sawmills in the UK processing locally-sourced timber, and a Head Office in Hartlebury, Worcestershire, you’ll find our range of garden buildings, fencing, decking and decorative structures for sale across many sites online and in over 3,000 retail stores. From the forest to the doorstep, we are involved every step of the way to ensure we bring you the best product and service.




Forests

Home Grown

We're proud to say that the majority of the timber we use is cut in our very own sawmill from trees grown in the UK.

Not only that, but our range is certified by the Forest Stewardship Council and the majority of our products carry the FSC logo - so you know that our timber is ethically sourced from well-managed, sustainable forests that are replanted for future generations.

(Certification number TT-COC-001790, Issue date 5 March 2015)

Made in the UK

Well made in Britain

The majority of the timber we use is grown and felled from managed UK forests across Scotland and Wales. After felling, the timber is cut and processed in one of our nearby sawmills and taken to our manufacturing operation in the heart of Britain. It is here our skilled workforce proudly produce the widest range of garden buildings, fencing and structures available in the UK.

All of the products that we sell are dispatched from this site. The final part of their journey is managed by our dedicated delivery department who are responsible for distribution direct to customers' homes by our fleet of vehicles.


Thrive logo

Helping Everyone Thrive

We like to do our bit for charity and are proud to support Thrive. Thrive uses gardening as therapy to bring about positive changes in the lives of people living with disabilities or ill health, or those who are isolated, disadvantaged or vulnerable.

Delivery

Forest Garden Delivery

Forest Garden Delivery 

We offer FREE Delivery to the majority of mainland postcodes. For all fencing and decking orders, we offer FREE delivery for all orders over £200 (£24.99 for orders under £200).

To check you qualify for Pick a Day delivery please use our postcode checker above or within checkout to check delivery is available to your area.


Pick a Day delivery is not available for CA, CO, DH, DL, DT, EX, IP, NE, NR, PL, SR, TD, TQ, TR, TS and Scottish postcodes, instead delivery will be 4 - 5 Weeks from the date of the order. A delivery surcharge of £49.99 is applicable to the following Scottish postcodes: AB, DD, DG, EH, FK, G, IV, KW, KA, KY, ML, PA, PH and TD.

Please Note - delivery is NOT available to the following locations: Channel Islands, Northern Ireland, Isle of Wight, Isle of Man, Isles of Scilly, Scottish Islands.

The Delivery Process

If you haven't already selected your delivery day in checkout, our delivery team will contact you to arrange a convenient delivery date. If you provide us with a mobile number, we can confirm the day before delivery if your delivery will be morning or afternoon.


Our drivers can leave your delivery in a safe place, please indicate this when selecting your delivery. It is important that the drivers have suitable access and no restrictions. We would not risk damaging your property whilst delivering a product to an un-safe location. Unfortunately, we will not be able to go through your property.


Other than our fence panels (which are delivered fully constructed), all of our products are delivered flat packed, direct to your home and are supplied with a set of instructions to support assembly.